My message Close
With Pre-Order, you can purchase the latest items added to our store in advance of them arriving with us.
Your Pre-Order is prioritised (at no additional charge); meaning that as soon as the product arrives with us, we can wrap it straight back up; ready for collection via Click & Collect or despatch to you — it often never even hits the stock room shelves!
With Pre-Launch, the date when we expect to receive the product ourselves is still a little too hazy to be confident in accepting Pre-Orders.
So, instead, you can submit your email address against the item you are interested in and we will email you as soon as stock arrives on the system.
Estimated Delivery & Collection Dates are given on Pre-Order and Pre-Launch products. They are for indication purposes only and can change at any time without notice.
The dates we provide are based on indications given by our suppliers. Whenever we get updated information from our suppliers we will endeavour to update the Estimated Delivery & Collection Dates provided on product pages.
Hassle free returns
RETURNED GOODS BY POST
Please send returns for orders placed through skiequipmentuk.com to:
Anything Technical LtdSand Aire HouseNew RoadKendalCumbriaLA9 4AY
All goods must be in new condition, with the original packaging, labeling and Anything Technical receipt. A refund request will be processed within 3 working days from receipt. Goods may be cancelled and returned under the Distance Selling Regulations 2000 for 14 working days from the day after delivery to you as the permitted cancellation period. This would not apply for special orders bought in specifically on the instructions of the customer. We recommend that items being returned be sent via insured, traceable delivery for your protection. Please note: all return postage charges to be met by customer, unless returning due to a fault. Please note all warranty returns must be clean and free from dirt and mud to comply with the current Health and Safety Regulations. All of the above does not affect your statutory rights as a consumer.Click Here for Returns Form
Season:Current
Brand:Binding Freedom
Code:20338M
Binding Freedom Inserts
Binding Freedom Inserts are stainless steel threaded inserts for installation in skis. They are installed permanently in non-system or flat top alpine skis so that bindings can be removed and replaced hundreds of times. The special design allows full threads 6mm deep while sealing the ski from water intrusion and installs in a hole drilled 9.5mm deep.
This enables you to remove, install, swap, and adjust your ski bindings just like snowboarders have been doing for years.
There are other similar products on the market but Binding Freedom inserts are superior for several reasons: They are constructed with rolled threads, for far superior pull-out strength, and longevity of internal threads. These inserts utilize a proprietary design to achieve the deepest internal thread engagement – 6mm deep. The slotted top doesn’t interfere with the threads, but greatly simplifies the installation process.
Before installation, clean the inserts with a de-greaser and wipe clean. Any grease or oil left on the inserts from the machining process could interfere with the epoxy. Never use LOC-TITE with inserts; only use Vibra-Tite.
The inserts are available in singles or sets of 14, 16, 18 or 20 but do not include screws as there is a variety of different screw types and lengths. When ordering the accompanying screw set, please add the binding make and model in the additional notes box in the checkout area.
Features: