Rossignol Angled Bale Ski Boot Buckles
Replacement buckles for all models and all years for Rossignol ski boots with the angled bale. These fit with a double screw attachment via the screw rivets provided.
! Compatibility Notice
The buckle supplied may differ in colour and style to the one in the image. We have limited styles and cannot guarantee a match. You can specify a preference in the notes box at checkout.
How to identify the correct buckle
If you count the buckle closest to the toe of the boot as the "Toe Buckle" the next buckle up is the "Instep Buckle", Next upwards is the "Lower Cuff Buckle" and the last one is the "Upper Cuff Buckle". Rossignol change the angle of the buckle depending on whether it's on the left or right boot, so you will need to select the correct side.
What we supply
The pack includes one buckle and a screw rivet attachment kit which comprises of two metric screws and two metric captive retaining nuts for the inside of the boot.
How to fit the buckle
The rivets holding the buckle are made of steel so remove using a steel drill with a diameter of around 6 to 8mm to gently drill off the heads of the rivets. Take care the drill doesn't slip and make a hole in the boot and beware that the drill can grab the plate of the buckle and spin it. Push out the rest of the rivet through the shell to make way for the retaining nut. Make the existing holes in the boot larger using a 5mm drill so the captive nuts will push into the holes in the shell. Then simply offer the new buckle up to the shell and screw together.
Fitting Service
If you are not confident with a screwdriver we offer a fitting service for a reasonable sum and if required we can do the job within 48 hours. Please ring us for a quote.