Description
The Hollow Drill Bit is a special drill which is used when fitting brass inserts into skis or snowboards when the binding mounting screw has sheared off or the thread in the ski has been stripped. The drill is designed to work with binding mounting jigs and is stepped to avoid drilling the hole too deep. However, you must check the gap between the jig and the stepped portion of the bit before drilling as the height of jigs can differ.
Sold as 1 item
Please Note
You must follow the manufacturers guidelines exactly before drilling into the top surface of a ski. Drill diameters and depths are usually visible on the top of the ski in the binding area. If you have any doubts at all please don’t hesitate to contact us for free advice, details below.
TECH TALK
For straightforward advice on how to use this product and for general ski and snowboard workshop enquiries please call us on 01539 734701 or you can e-mail us.
Please note we also provide ski and snowboard technician training courses for the aspiring workshop technician, all the information is available on our Training page.
